Just how to link a Laundry Sink and Washing device to your exact same Drain
Both space and plumbing connections are tight in many basement setups. This kind of a situation, it is possible for both the washing machine and washing sink to share with you the drain that is same. In order to connect up a sink towards the drain inlet, a plumbing system fixture called a tee will need to be set up in case it isn’t inside already. This permits the drainpipe for the sink to be connected to the standpipe for the automatic washer.
Install Sewer Tee
Examine the sewer pipeline inlet located nearest the washing and sink machine. This is a free-standing pipeline having an end that is open. When there is not a tee connection for the sink inlet, one will have to be set up.
Turn the water supply off for both the automatic washer and also the sink. These two fixtures could have two split supply valves, one when it comes to hot plus one for chilled water. Rotate the knobs from the ends of this valves clockwise all the best way to cut from the water.
Unplug the washer through the charged energy socket.
Slice the sewer inlet pipe in two about halfway down. On metal pipe, work with a rotary cutting device having a steel blade that is cutting. Make use of hacksaw or other saw on PVC pipeline. Sand down any rough sides on the pipelines.
Link a tee suitable into the sewer pipe. Secure a metal tee to your pipe with a plastic coupling and hose clamps. Fasten the clamps with a screwdriver. Aim the tee in direction of the sink drainpipe. A PVC pipeline is glued into spot with primer and PVC glue.
Link a drainpipe that is straight towards the the surface of the tee. Protected it with a plastic coupling on steel glue or pipe another PVC pipe set up. Safe the pipeline into the stud that is nearest or wall by having a clamp to help keep it constant.
Connect the Sink and Automatic Washer
Insert the drain hose through the automatic washer to the the top of sewer pipeline. Safe it set up having a plastic tie or hose clamp.
Fit together the and put them into position involving the tailpiece together with sewer pipeline. This will assist you to determine if the pipes have to be cut further before final placement. Cut PVC pipelines having a hacksaw and steel pipelines having a rotary device with a steel attachment 
that is cutting. Sand down any rough sides.
Link the drainpipe for the sink to your tee inlet. Glue PVC pipeline set up with primer and glue. Protected steel pipeline by making use of pipe thread ingredient to your drainpipe before screwing it to the tee.
Insert the p-trap set up amongst the tailpiece from the underside for the sink plus the drainpipe. Slide the couplings within the end connections and tighten up all of them with a wrench.
Switch on the water supply valves for the sink and washing machine by rotating them counterclockwise.
Plug the washing machine back to the wall surface socket.